Restarting the Pocket PC
Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:
Reset - Soft reset
Press the “Reset Button” of Pocket PC with the tip of the stylus.
Default Settings procedures
If the touch screen is functional, please tap
,Programs, Utilities, and then Default Settings.
 | 1.
If this application is inadvertently accessed, please select
the [X] to the upper right of the screen to exit, the
system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button. |
| Appropriate situation: If the Pocket PC is
unable to maintain normal operation, but the touch screen is functional. Please refer to the instructions in this section to troubleshoot. Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user’s input data, newly installed programs, and user custom settings will all be cleared. | |
Clean Boot - Hard reset
Hold the “Power Button” and press once on the “Reset Button” with the tip of the stylus, and release both buttons simultaneously. Next, continually hold the End Button until the system inquiry screen is displayed, then release the End Button. Answer the question(s).
Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”.
Appropriate situation: If a previous reset has already
been attempted and the Pocket PC is still unable to maintain normal
operations, has no response, or if the screen is frozen.
|Before
executing the preceding “Cold boot method”, please carefully consider
the following instructions and then decide on the cold boot method.
1.
After a cold boot is performed, if no buttons are pressed, when Pocket
PC automatically completes the system startup process, the last display
will be the Today screen. This is identical to the reset result.
2.
If a previous reset has already been attempted but the Pocket PC is
still unable to maintain normal operation, consider the following
solution:
After cold boot, hold the End Button on the bottom right
of Pocket PC until the system inquiry screen is shown, and then release
the End Button. Next, please read thoroughly through the instructions
on cold booting before continuing carefully.
Perform cold boot
and hold the End Button . The system will display a two question
inquiry screen. Please refer to the following instructions before
careful consideration.
 | 1.
Erase all data and load default? (The default is “No.” If Yes or No was
not selected, after a few seconds the system will automatically execute
the default No.) If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete. |
 | Delete registry only? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will delete registry only. |