Eten M800 hard reset soft reset

Restarting the Pocket PC

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.

For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

Eten Glofiish M800 Clean Boot - Soft reset

Press the “Reset Button” of Pocket PC with the tip of the stylus.

Eten M800 Glofiish hard reset soft reset

Default Settings procedures

If the touch screen is functional, please tapEten M800 Glofiish hard reset soft reset,Programs, Utilities, and then Default Settings.

Eten M800 Glofiish hard reset soft reset 1. If this application is inadvertently accessed, please select the [X] to the upper right of the screen to exit, the system will not be affected.
2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the
block to the left. Then tap the OK button.
Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory
pre-installed applications. Other settings such as user’s input data, newly installed programs, and user custom settings will all be cleared.

Eten Glofiish M800 Clean Boot - Hard reset

Cold boot method: Hold the “Power Button” of the Pocket PC with one
hand while holding the stylus tip to push in the “Reset Button” with the
other. Simultaneously release both the “Power Button” and “Reset Button”.

Eten M800 Glofiish hard reset soft reset


Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”.

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.

|Before executing the preceding “Cold boot method”, please carefully consider the following instructions and then decide on the cold boot method.

1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button . The system will display a two question inquiry screen. Please refer to the following instructions before careful consideration.

Eten M800 Glofiish hard reset soft reset 1. Erase all data and load default? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.)
If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete.