Solved: How to hard reset Eten Glofiish M810



Restarting the Pocket PC
Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

1. Reset Press the “Reset Button” of Pocket PC with the tip of the stylus.

2. Default Settings procedures If the touch screen is functional, please tap Eten M810 reset start button, Programs, Utilities, and then Default Settings.

3. Clean Boot Hold the “Power Button” and press once on the “Reset Button” with the tip of the stylus, and
release both buttons simultaneously. Next, continually hold the End Button Eten M810 reset end button until the system inquiry screen is displayed, then release
the End Button. Press Soft-Key to answer the question.

Eten M810 Reset

Reset method: Press the “Reset Button” of Pocket PC with the tip of the stylus.

Eten m810 hard reset

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain
the Microsoft Windows, factory pre-installed applications, user’s input data, newly installed programs, and user custom settings.

 

Eten M810 Default Settings

Tap Eten M810  reset start button, Programs, Utilities, and then Default Settings

Eten m810 hard reset

1. If this application is inadvertently accessed, please select the Eten m810 hard reset to the upper right of the screen to exit,
the system will not be affected.
2. If you are certain that you wish to perform this action, please select the data input block on the right,
and enter the authorized code in the block to the left. Then tap the OK button.

 

Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the
instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user’s input data, newly
installed programs, and user custom settings will all be cleared.

 

Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the

other. Simultaneously release both the “Power Button” and “Reset Button”.

Eten m810 hard reset

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen. Before executing the preceding “Cold boot method”, please carefully
consider the following instructions and then decide on the cold boot
method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be
the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button Eten M810 reset end  button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button Eten M810 reset end  button. Please refer to the following instructions before careful consideration.

Eten M810 hard reset

Erase all data and load default? The default is “No.” If Yes or No was not
selected, after a few seconds the system will automatically execute the default No.

If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will
erase all data and load default. After your Pocket PC restarts, follow the instructions on
the screen to complete.

Caution!
1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer “Yes” to the question displayed
after a cold boot, other items such as the user’s input data, newly installed programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
- Perform a Reset.
- Performing a Cold Boot, and answer “No” when the above question displays.