Resetting Sony Ericsson MW600 Bluetooth headset


Reset the MW600 headset if it behaves unexpectedly. Resetting the headset removes all information
about paired devices.

To reset the headset
1 Make sure the headset is turned off.
2 Press and hold down POWERmw600 resetuntil the pairing indication appears.
3 Simultaneously press and hold down POWER mw600 resetand CALLmw600 resetbutton until the headset turns off.

sony ericsson mw600 reset

To pair the MW600 headset with a phone


1 Make sure the headset is turned off.
2 Turn on the Bluetooth function in the phone.
3 Turn on Bluetooth visibility in the phone. This makes the phone visible to other
Bluetooth devices.
4 Place the phone within 20 cm (8 inches) of the headset.
5 Press and hold down mw600 reseton the headset for about 5 seconds until the pairing indicator
appears on the display.
6 Auto pairing in your phone: When asked to add the MW600, follow the instructions
that appear.
7 Normal pairing in your phone: Search for and add a new device.
8 If a passcode is required, enter 0000.


Pairing the headset with another device

 
To use the headset with another device, such as a gaming device or a PC, you need to pair the headset with that device. After successful pairing, the headset connects automatically to the device as soon as the headset is turned on and within range.

To pair the headset with another device


1 Make sure the headset is turned off.
2 Turn on the Bluetooth function in the other device.
3 Place the other device within 20 cm (8 inches) of the headset.
4 Press and hold down mw600 reseton the headset for about 5 seconds until the pairing indicator
appears on the display.
5 In the other device: Search for and add a new device.
6 If a passcode is required, enter 0000.
Replacing devices
When all three paired devices are activated, you can replace one device with another.
To replace a paired device
• Use the touch volume control to select a device.